How to Spray Walls Without Hitting Ceiling?

How to Spray Walls Without Hitting Ceiling?

When you need a change to add a little more spice to your entire house, a change of wall paints will satisfy your desire more than enough. But you will struggle in cases like applying two different colors in two adjoining walls, the boundary of the ceiling, and the lower boundary to your flooring. How to spray walls without hitting ceiling? If this is the matter that caused your project’s postponement, then we have some good news for you in this article!

When self-painting in your home, it is crucial to know some little tricks beforehand to avoid any mess or unexpected outcomes. We know that when painting, ceilings must be colored first. It does not matter if the paint spreads out of the limit of the ceiling to the walls and crown molding as you paint those afterward. But there is hesitation regarding the boundary of walls and wall trims or walls and the ceiling. 

How to Spray Walls Without Hitting Ceiling?

Applying paint with a spray machine is a painting-made easy and exciting task. You should be careful so as not to overspray paint in the areas that have already been painted. 

How to spray walls without hitting ceiling? The market has paid attention to this question and has presented a smarter solution. The adhesive tape, commonly known as painter’s tape, will satisfy your need to get fine lines, borders, and shapes and help secure other appliances from the paint spray.

This tape can be attached to the required surface by its adhesive side, and the material can be torn easily as it is made up of thin paper material. You need no cutting device to remove the tape after usage. Painter’s tapes come in various widths, such as ¾ inches, 1 inch, 2 inches, 1 ½ inch, and 3 inches. 

Can You Use Masking Tape as Painters Tape?

Masking tape is also an adhesive tape which will seem like an alternative for painter’s tapes. It is true that all the painter’s tapes belong to the masking tape category. But there are different types of masking tapes other than painter’s tapes. The major difference between these two types of tapes could be seen in the removal. The painter’s tape will not leave any marks, but masking tape presents a possibility of remaining residual marks when kept for a few hours. 

The Professional’s selection is a painter’s tape. But if you need to perform smaller projects, you can use masking tape for the same purpose. But it would be better to use painter’s tape in larger projects like painting walls. 

It is observed that masking tape is used by people as of its lower price when compared to painter’s tape. Masking tapes come in white and are comparatively lesser in weight. More adhesive nature could be seen in masking tapes than in painter’s tapes. Painters tape comes in Blue or Green and will be less adhesive to the surface, making it easier to remove after you are all done with the paint spraying. 

Therefore, if you want to avoid peeling off some amount of paint with the tape used to get a finer finish, then the best option is the painter’s tape. Unlike masking tapes, some types of painter’s tapes can be kept for even two weeks.

What is the Difference Between Blue and Green Painters Tape?

Painters tapes come in various values of adhesion as low adhesion, medium adhesion level, and high adhesion. Low adhesion tapes match smooth interior surfaces like wallpaper and flooring as they can be removed easily. The medium adhesion type can be used in both interior and exterior and is capable of lasting for about two weeks without peeling paint. High-adhesion painters tapes are made especially for rough outdoor surfaces and should be removed within seven days. 

With that knowledge of the adhesive quality, it will be easier for you to understand the theory behind blue and green painters tapes. 

Blue Painters Tape

  • Can be used for outdoor surfaces made up of wood, steel, vinyl, or glass as this type is a less adhesive tape. Blue painter’s tape can be used in the interior too. The blue tape matches perfectly for surfaces like glass door frames or windows that are exposed to sunlight.
  • is a safe use on your floor tiles and wooden flooring inside a house. 
  • Is a better option for covering up crown moldings, wooden structures, and appliances as this gives a smooth finish without damaging the paint of the surface due to its less adhesive nature. 
  • Is lower in price than a green one.

Green Painters Tape

  • It must be used in instances where you need more protection than a paint project, like applying lacquer.
  • It gives more resistance to paint leakage than blue painter’s tape, but it would be better if you avoid this for indoor painting projects as the high adhesiveness could peel paint.
  • It is more expensive than blue tape due to the higher adhesive feature and less bleeding.  

How to Tape for Painting?

Before pasting tape, you must clean the surfaces. Dust and residuals may cause poor adherence. Now you can paste the tape. It is better to use a soft-edged tool to press the tape to the surface. 

You can remove the tape when the paint is completely dry; usually, it will take around one hour. If you need to keep it for another day, remember to use the correct type of painter’s tape, as we have discussed in the above paragraphs.

How do you Remove Painter’s Tape without Removing Paint?

Separate the edge of the tape from the wall by using a putty knife or a blade. You can also heat the surface using a blow dryer for about two to three minutes. Then peel off a small portion and slowly remove the tape with an angle of 45°, pulling the tape backward. 


Painters tape is the best option you have got to avoid over-spraying paint. If you follow this article, you will have a clear idea about selecting and using a suitable tape.

More Like This: Check Out These Related Articles

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *